We love this mold for making soap for visiting guests around the holiday. Professional soapers use it to craft soap for the hospitality industry.
Common Uses: Melt & Pour Soap. Cold & Hot Process Soap.
Points of Interest: Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Makes (8) Individual Bars
Approximate Bar Weight: 2 oz
Measures: 2.5" x 1.5" x .75"
Bar is perfectly straight without rounded corners. Mold walls are built with extra thickness to prevent bowing.
Once mold is used for making soap, it should not be used for food production. To avoid damage to mold, do not use sharp metal tools to cut or remove contents. Never place near an open flame, use under a broiler, or on a cook top burner.
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
 | Dana from Cool
Used in Soap - Melt & Pour |
Love this mold!
I love these molds. The only thing is that sometimes the fragrance oil smell is hard to get out. Soaps unmold easily. I will definitely be buying more. |
|
| Michael from North Chesterfield
Used in Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Soap - Shave Shampoo |
Just what we needed. Ordering more!
Just right. We needed a guest size for our product line. Will be buying more of these. |
|
| Jamie from Tucson
Used in Soap - Melt & Pour, Bath Fizzies & Salts |
Rectangle Guest Silicone Mold 1610
This mold is perfect for soap samples or soap favors. I actually used this mold to make shower steamers. I like the shape because it is not the typical mold most use and prevents someone accidentally mixing up their bath melts with steamers. I love the rectangle style. |
|
| Pamela from Xenia
Used in Soap - Melt & Pour |
LOVE LOVE LOVE
This mold is so easy to work with.. I just love it using it. Need to buy a few more |
|
| Michele from Staurt
Used in Soap - Melt & Pour |
Awesome Product
This is a great mold. It is VERY sturdy and is a true 2 oz. bar. Very easy to use and washes up beautifully. |
|
| John R from Philadelphia
Used in Soap - Melt & Pour |
Awesome
Love it! |
|
| Karen from SPANAWAY
Used in Soap - Melt & Pour |
LOVE IT!
As with all of Crafter's Choice silicone molds. I LOVE IT! I love the curved shape as it fits in the hand so well and you can get a good grip on the bar. I think I own almost each and every one they sell. Yes! I definitely need an intervention! What can I say? |
|
| Julie from Forest
Used in Soap - Melt & Pour |
Rectangle guest soap mold
Love this mold. |
|
| Katherene from Monrovia
Used in Soap - Melt & Pour |
Rectangular Guest Silicone Mold
Received the mold yesterday. Great quality as usual. Planning to use it with weekend. Thanks Crafter's Choice & Crafter's Choice. |
|
| Angela from Sahuarita
Used in Soap - Cold Process |
Love Love Love
I recently used rectangle soap mold for CP soap; it pop out so easy and the shape and size was perfect. I will definitely be ordering a few more. |
|
| Jaazia from Aguascalientes
Used in Soap - Melt & Pour |
Like it very much
This Silicone Mold is so easy to work with.. I just love it... size is perfect and my clients like it very much... I need to buy more. |
|
| Deana from Blue Jay
Used in Soap - Melt & Pour |
Silicone Mold Guest
Ive made one batch so far and I only filled the cavities 1/2 way to give myself 1 oz bars. Worked perfect and the come out easy |
|
| Deborah from Cove
Used in Soap - Cold Process |
Rectangle guest mold 1610
Really like this mold. I plan on making a variety pack of 4 guest bars to use in my gift sets. |
|
| Mary from Las Vegas
Used in Soap - Melt & Pour |
Retangle Guest mold
Love the size. Perfect for small size hands! |
|
| Cheryl from Todd
Used in Soap - Cold Process |
I LOVE this mold!
I ordered this mold to make travel size bars and it is PERFECT! So perfect that I had to order another one and plan on getting at least 2 more. This mold is easy to use, cleans well, and makes a perfect bar of soap. |
|
| LynneMarie from Albuquerque
Used in Soap - Melt & Pour, Soap - Cold Process |
Perfect size
I love these guest molds. They're the perfect size for sample and test bars. |
|
| Sharon from Niles
Used in Soap - Melt & Pour |
Perfect
Perfect mold for guest soaps. Very easy to use. Releasing the soap is a breeze. |
|
| Mary from Crestline
Used in Soap - Melt & Pour, Lotion Bars & Sticks |
Rectangle Guest soap mold
The perfect size for making gift/sample size bars. They unmold easily and have a nice finish. |
|
| Anthony from Toledo
Used in Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Lotion Bars & Sticks |
Rectangle Guest Silicone Mold 1610
Excellent product to make bars of soap products in the sizes meant for gifts, samples or travel size! Recommended to all!!! |
|
| Kimberly from Westland
Used in Soap - Melt & Pour |
Rectangle Silicone Guest Soap Mold
Love this mold! Silicone makes it easy to "pop" soaps right out! Makes a cute 2 oz bar! Easy to use and to clean! |
|
 | Irene from Mountain top
Used in Soap - Melt & Pour |
Great size
Loving the size, just had a problem with it ripping on me. |
|
| Stacey from Myrtle Beach
Used in Soap - Melt & Pour, Soap - Cold Process |
Great size!
I love this mold for cute little guest sized soap. It is easy to get the soap out. I would recommend! |
|
| Natasha from Troy
Used in Lotion Bars & Sticks, Massage Oils |
great little mold
This is a nice mold. Small sized bars that are perfect for on the go. Lotion bars are great size! |
|
 | Christina from Lake Forest
Used in Soap - Melt & Pour |
Great look but NOT 2oz
This is a great mold for SAMPLE, GUEST or FAVOR soap bars. Keep in mind they are very small. They do make a nice looking bar and a nice size to make sample products, guest size bars or for party favors. Another factor to keep in mind is that it does not hold a true 2oz. I poured my melt and pour soap in the mold until it started to seep over a little. I let it harden completely then weighed it. This mold holds 1.8 oz of soap. I recommend using 1.5oz of soap base and saving the other oz for your additions. Unless you don't mind wasting a little soap. :) |
|
| Priscilla from San Antonio
Used in Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Lotion Bars & Sticks |
love them
I can make a full loaf and cut them into 1/2" slices and have very cute and little waste of soap. My guest love them and they are perfect to use as an extra mold for the left over soap to give as samples. |
|
 | Patricia from Covington
Used in Soap - Cold Process |
Very disappointed
This mold ripped on the second use. I like the size of the mold and had high hopes. My first batch of cold process soap using the guest silicone mold came out great. When removing the soap from the second batch, the mold ripped. I guess I can still use it since it did not rip through the cavity, but it is not of the quality I expected. |
|
| Manuel A from panama
Used in Soap - Melt & Pour, Soap - Cold Process |
great mold
Loved it! Great quality, good price. The silicone is thick enough to hold everything in place. No warping on the sides. Of course its small so there shouldn't be all that much warping even for a lower class mold, but if they use this same materials for the bigger ones, you'd get no warping or fat sides.. Seeing this results makes me regret not buying regular size and loaf size. BEWARE OF SIZE. Its 2 fluid oz size. Not 2 oz of finished soap. |
|
| Natalie from Belleville
Used in Soap - Cold Process |
small
I know it gives the dimensions but it is a little smaller than I expected. I guess make sure you really need this small of a bar before you buy. That was probably more my fault. |
|
| christy from Dover Foxcroft
Used in Soap - Melt & Pour |
Love this mold!!!
This mold is so easy to get my soap out of and my customers love the size as I call them a try me or guest size. Definately recommend this mold! |
|
| Melissa from Valley Cottage
Used in Soap - Melt & Pour |
Awesome Product
I ordered this product after using store bought plastic molds. This product has made my life so much easier and makes amazing soap molds! I couldn't be happier with the product. |
|
| Lori from Oakwood
Used in Soap - Melt & Pour |
Love it!
This is my second one of these. I have made over 100 bars with my first one and have had no problems such as unmolding or tearing. They are great and I will continue to use. Thanks! |
|
| Jeremy from Long Beach
Used in Soap - Cold Process, Soap - Hot Process |
Nicely shaped guest mold
I love the shape and size of the rectangles in the 1610 guest mold and was disappointed that Crafter's Choice's guest log mold generates squares rather than the neat rectangles of the 1610. I've used them with a few drops of colored "batter" added and swirled with a chopstick to make nice little guest soap. The size is perfect for traveling, a generous sample, or a modest gift. I suggest using a good deal of sodium lactate to aid in mold release. I have had the lower corners stick even with 1-2%. |
|
| Deborah from Christ Church
Used in Soap - Cold Process |
Great Mold
Great size for guest or sample soap. I'll be ordering more. |
|
| Mariluz from Willemstad
Used in Soap - Melt & Pour |
nice
Great |
|
| ginger from Englewood
Used in Soap - Melt & Pour |
great for guest soaps
I had an order for guest soaps for wedding favors. this was perfect. the silicone mold made it easy to get the soap out and was the perfect size. |
|
| Andrea from Grayson
Used in Soap - Cold Process |
Sample Bars
Love, love, love this mold! It makes the perfect little sample bars for customers. |
|
| Andrea from Harker Heights
Used in Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks |
Love this mold
I love every one of crafters choice molds. You will always find a use for them. Great release,clean edges. |
|
| brittny from Fort Myers
Used in Soap - Melt & Pour, Soap - Cold Process |
Great for embeds
These area great size for my wedding favor soaps! Great for large orders too that have embeds. |
|
| Melissa from HERNANDO
Used in Soap - Melt & Pour |
Awesome Guest Size
This mold works very well with M&P soap base. It's the perfect size to use for decoration or to give to your guest to use. Mold holds up very well and is easy to unmold your soap. I highly recommend this and the other Crafter's Choice silicone molds...they make making soap SO much easier. |
|
| Georgia from MERIDEN
Used in Soap - Melt & Pour |
Great for guests
This is a great size for guest soaps. Customers like the rectangle shape, since it reminds them of the soaps from hotels, and one bar holds up for several uses. This is a great mold for samples and tests, too. I love how durable the mold is. |
|
| Christen from OCALA
Used in Soap - Melt & Pour, Soap - Cold Process |
Perfect!
I have used this mold for both MP and CP. It holds up great after tons of use and makes the perfect size guest bar. In CP, make sure you add sodium lactate to your recipe so it will firm up and be able to be unmolded. Great price and great quality. I've never been disappointed by a Crafters Choice mold yet. |
|
| Christina from Lady Lake
Used in Soap - Melt & Pour |
Just right!
This mold is the perfect size for samples and party favors - enough for several uses. I'm able to pour exactly 1 lb. of melt & pour soap to fill this completely, each cavity is 2 ounces. I've had these for two years and they are still in the same condition as when I first bought them, even through hundreds of uses. An excellent value. |
|
| Becky from Ridgefield Park
Used in Soap - Melt & Pour |
Amazing Mold For Melt & Pour ! :D
This mold is great ! Very high quality and not flimsy at all ! Makes very professional looking bars ! Also perfect for tester bars / gift soaps ! I have two and might get more soon ! :D |
|
| benjamin from savannah
Used in Soap - Melt & Pour |
easy
this is the easiest way to make melt & pour soap. soaps pop right out! |
|
| adrian from PLYMOUTH MEETING
Used in Soap - Cold Process |
very nice
seems to take a bit longer for soaps to harden up so they can be removed, but I am use to wood molds, very nice, perfect size bars |
|
| Carrie from Dayton
Used in Soap - Cold Process |
Great size for sample soaps
This mold is adorable and makes a nice 2 ounce bar of soap. Great for guest soaps, travel soaps. I made a batch of cold process soap and used this mold to make Luffa Soap. Worked out great, I simple cut the luffa in half and added one to each mold. Looks adorable. I will be purchasing more. Great to use when you have extra soap batter. Mold holds 10 ounces and would be great to use for test batches. Works great when layering colors as well. There is allot of room in the 2 ounce squares. Highly recommend. |
|
| Barbara from Anderson
Used in Soap - Cold Process, Soap - Hot Process |
Perfect sample size
This mold is so perfect for my sample bars. I waited to order this but wish I had ordered a couple extra. Will order it again. |
|
| belinda from barrington
Used in Soap - Melt & Pour |
Great Mold
I love this mold and I use it to make my sugar cubes and sample soaps All I use is crafters choice molds and I find they hold up real well and perform time after time. Thanks Crafter's Choice! |
|
| Amy from Grand Blanc
Used in Soap - Melt & Pour |
Great design, shape & size
So happy to have found these at Crafter's Choice! These are the perfect sized bars for guest soaps. Thrilled to have them in silicone! |
|
| Ann from Sapulpa
Used in Soap - Melt & Pour |
Small Rectangle Mold
This mold is great when I have a bit of M&P left over. I also use it for making samples of my soaps. |
|
| Kym from Corydon
Used in Soap - Melt & Pour |
Cute mold
This is such a great mold for making soap samples. There is just enough room to be able to do layers etc. This mold makes really cute soaps and everyone loves them. I am planning on buying a few more of these and also the square guest mold. |
|
| Lisa from Butler
Used in Soap - Melt & Pour |
Silicone Mold
This product was very easy to use and soap releases nicely. |
|
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
• $9.99 for 1 Mold
• $40.98 for 5 Mold
• $539.17 for 80 Mold
|
0 item(s) in Cart 